Locate your Washing Machine Motor . There will be two wire leads connected to the motor. Disconnect the motor's two wire leads from the wiring harness. The wires will be held in place with metal slip on connectors. Firmly grasp and then pull on these connectors to remove the wires. Do not pull on the wires themselves.
Depending on your model, your motor could be anchored to the abrasion apparatus with any amount of screws. Abolish all the screws afore you abolish the motor. There may aswell be a bounce present to advice defended the motor to the machine. Abolish the spiral afore removing the motor, but be abiding to alter it afterwards the new motor is in place.
Discard acclimated motor and admit new one in its place. If castigation is a archetypal that makes use of stabilizing spring, put it aback in abode now. Defended the new motor to the apparatus with screws, if you removed any from the old motor. Reconnect the motor's base harness.
Locate your washer's motor. There will be to wire leads affiliated to the motor. Disconnect the motor's two wire leads from the base harness. Set your multimeter to the R x 1 setting. Touch anniversary of the meter's probes to one terminal each. Your motor should appearance little attrition .
Now check the ground connection. Place one probe on the bare metal housing of the motor. Place the other probe on each terminal, one at a time. You should not receive any reading on your meter from this test.
If your washer's motor fails either of these tests, you will have to replace it. For more information about Washer Motor : https://www.zjnanyangmotor.com/